RESIDENTIAL POLYURETHANE CONCRETE LIFTING & LEVELING IN WINNIPEG

FREE ESTIMATES

RESIDENTIAL CONCRETE
LEVELING IN WINNIPEG

If your driveway, sidewalk, patio, or garage pad is sinking or uneven, you are not alone. Winnipeg’s freeze-thaw cycles and shifting soil cause concrete to settle over time, and that is where we come in.

We specialize in lifting and leveling sunken concrete using advanced polyurethane foam. Our process is fast and clean, and it avoids the cost and disruption of tearing out and replacing your slabs. Most jobs are completed in just a few hours, and your concrete is ready to use the same day.

Why does residential concrete sink?

In simple terms, the problem starts with the soil. When Winnipeg's heavy clay soil shifts, settles, or washes away, the slab loses its support and begins to sink, crack, or become uneven.

Common causes include:

Water washing out the soil due to poor drainage, gutters, or downspouts
Freeze and thaw cycles that expand and move the ground
Improperly compacted soil during construction
Empty spaces forming from burrowing animals or decomposing material

As the soil weakens, the concrete above it begins to settle. If the issue is not addressed, it can quickly lead to tripping hazards, added stress on your foundation, and ongoing drainage issues.

SCHEDULE A
FREE ESTIMATE

QUICK, CLEAN CONCRETE LEVELING WITH FOAM

Step 1. Injection holes are strategically drilled around the areas where the concrete is sunken and requires lifting.

Step 2. Once everything is prepped, and the hose and material are in place, the polyurethane foam is injected through the holes. It expands to fill the space underneath the concrete slab, using the slab itself to drive the foam into the crevices, thereby lifting the concrete back to its original position.

Step 3. Once the concrete is stabilized and lifted to the proper position, the injection holes are filled with new cement, allowing you to use your surface immediately.

Polyurethane concrete raising uses a foam material that is injected under the slab. When the components of the material are mixed, a reaction causes the material to expand. This expanded foam fill any voids beneath the slab and raises the concrete. This material will never lose density, is permanent and weighs only about 2 lbs per cubic foot.